The lead door surface is beautiful, the stainless steel plate and the plate surface are connected by the elevator stainless steel plate interface technology, and all of them are made of imported adhesive, the adhesive is very flat, firm, and does not degumme; the main structure adopts a unique design, so that the gap between the door and the wall dose leakage is very small; the infrared anti pinch device is equipped to ensure the personal safety of employees; in addition, it also has the anti three-phase power inverter to damage the screen door Motor device to ensure that the three-phase power inverter can know the power inverter immediately.
Radiation proof lead door is mainly used for import and export to block the passage of radiation. Mainly used in hospitals, computer rooms and mining areas. According to the type of door, it can be divided into flat open ray anti-theft door, push-pull ray anti-theft door and electric ray anti-theft door.
1. Open the lead door horizontally; open the lead door, which can be divided into inner door and outer door. The structure and material of the door body are determined by the power of the radiator (kV) and the size of the door hole, and the hardware is imported special parts.
2. Push and pull the lead door; push and pull to prevent the thunder door. The opening direction moves parallel along the wall. The body and material structure of the door are determined by the power of the radiator (kV) and the size of the door hole. The door frame structure and the door opening structure are different.
3. Electric lead door; electric ray proof door is generally suitable for large door body. Due to heavy weight and laborious manual opening, electric opening mode is adopted.
Open type can be divided into flat type and flat type. How to extend the service life of automatic radiation proof door
1. The dust on the industrial door shall be cleaned regularly to keep the industrial door, glass and hardware clean and bright. Because even stainless steel, once stained with dust and dirt, chemicals will corrode the surface of stainless steel. In the long run, it will make the steel body become bad and rotten, which will affect the anti radiation operation performance of automatic doors.
2. Once the radiation protection and oil pollution make it difficult to clean the automatic door, clean the door with a clean cotton swab. It is bright. It is better not to clean the door with strong acid or alkali solution. This will not only damage the surface finish, but also damage the metal debris and oxide layer on the surface of the protective film, resulting in the corrosion of metal parts. Especially when some customers clean the wall with sulfuric acid, they must pay attention not to affect the doors and windows.
3. The particle debris in the box shall be cleaned in time to avoid blocking the drainage channel, leading to drainage and leakage. Serious consequences will also affect the operation of automatic radiation protection door, shorten the life of automatic door, and have safety risks.
4. When opening the industrial door, the strength shall be moderate, and the speed of opening and closing shall be uniform as far as possible.
5. Generally, when entering and leaving the automatic door, it is necessary to avoid rush and force impact, and try to avoid hard objects hitting the automatic door against radiation or scratching the profile surface.
6. In case of inflexible opening or other abnormal conditions during the use of industrial door, the reason shall be found in time. If the customer cannot eliminate the fault himself, the manufacturer or supplier of radiation protection automatic door shall be contacted in time, so as to eliminate the fault in time. If the automatic door is not maintained in time, it shall be suspended to avoid accidents.