Strong chemical inertness, good stability, acid and alkali resistance, moderate hardness, high specific gravity, high whiteness, can absorb harmful rays. Used in all kinds of high-end coatings, medium and high-end inks, pharmaceutical synthetic chemicals, rubber, paper, ceramics, cosmetics and other fields. Product grade BaSO4 content first grade & Ge; 98% 95% second grade & Ge; 96% 92% third grade & Ge; 93% 90% fourth grade & Ge; 90% 85%

用途：

Purpose:

1、用于涂料-可以用作油漆和涂料的填料，它可以代替更昂贵的原材料，例如沉淀的硫酸钡，立德粉，二氧化钛和活性二氧化硅。适用于控制涂料的粘度并使产品光亮稳定。

1. For coatings - can be used as a filler for paints and coatings, it can replace more expensive raw materials, such as precipitated barium sulfate, lithopone, titanium dioxide and active silica. It is suitable for controlling the viscosity of paint and making the product bright and stable.

2、用于塑料行业-可用作塑料ABS原料的填料，使产品具有光泽和光泽，同时可以提高产品的强度，刚度和耐磨性。

2. Used in plastic industry - it can be used as the filler of plastic ABS raw material to make the product have luster and luster, and improve the strength, rigidity and wear resistance of the product at the same time.

3、用于橡胶工业。 500目以下的产品可广泛用作橡胶制品的填料，以降低成本，提高产品硬度，耐酸碱，耐水性等，并对天然橡胶和合成橡胶具有良好的补强作用。

3. Used in rubber industry. Products under 500 mesh can be widely used as fillers of rubber products to reduce costs, improve product hardness, acid and alkali resistance, water resistance, etc., and have good reinforcing effect on natural rubber and synthetic rubber.

4、用于造纸工业-高细度重晶石粉可用作白板纸和铜版纸的填充剂和涂料填充剂，以改善白度和表面覆盖率。产品规格：325、 400、600、800、1000、1250、1500、2000、3000、4000、5000、6000目等。产品规格：0-325目，25kg，50kg，比重3.8-4.2；

4. Used in papermaking industry - high fineness barite powder can be used as filler and coating filler of white board paper and copperplate paper to improve whiteness and surface coverage. Product specifications: 325, 400, 600, 800, 1000, 1250, 1500, 2000, 3000, 4000, 5000, 6000 mesh, etc. Product specification: 0-325 mesh, 25kg, 50kg, specific gravity 3.8-4.2;

防辐射涂料，硫酸钡砂分为白色和黑色。具有比重高，防护强度高，施工方便，使用寿命长的优点。它是用于医院X，CT室和工业检查防护，核医学，核工业等高强辐射防护的材料。具有医疗CT，X光机，同位素处理，钴60，加速器等机房辐射防护和装饰工程的良好防护和低成本的优点；工业X，γ射线检查室辐射防护工程。

Anti radiation coating, barium sulfate sand is divided into white and black. The utility model has the advantages of high proportion, high protection strength, convenient construction and long service life. It is used in X, CT rooms and industrial inspection and protection, nuclear medicine, nuclear industry and other high-strength radiation protection materials. It has the advantages of good protection and low cost in the radiation protection and decoration engineering of medical CT, X-ray machine, isotope processing, cobalt 60, accelerator and other machine rooms; industrial X & gamma; radiation protection engineering of ray examination room.

采用的防护技术和防护材料，合理的设计和精确的结构。硫酸钡和水泥按1：3的比例均匀混合以进行辐射防护。厚度大于3mm，可以有效阻挡光线的伤害。硫酸钡是当今市场上常用的辐射防护材料。它可以与铅结合使用。面板可以一起工作以获得更好的结果。

Adopt advanced protection technology and materials, reasonable design and accurate structure. Barium sulfate and cement are mixed evenly in the proportion of 1:3 for radiation protection. The thickness is more than 3mm, which can effectively block the damage of light. Barium sulfate is a common radiation protection material in the market. It can be used in combination with lead. Panels can work together for better results.

它完全符合辐射防护和健康管理的相关法规。复合保护涂层按照一定的科学比例由多种保护材料组成。可广泛用于医疗，工业检查和其他放射性物质和辐射设备使用受到保护的地方。它是X和γ射线的理想屏蔽材料。

It is in full compliance with the relevant national regulations on radiation protection and health management. The composite protective coating is composed of a variety of protective materials according to a certain scientific proportion. It can be widely used in medical treatment, industrial inspection and other places where the use of radioactive materials and radiation equipment is protected. It is an ideal shielding material for X and & gamma; rays.