1：测量门洞口
1: Survey door opening
2：根据门洞口计算出门的规格尺寸
2: Calculate the size of the door according to the door opening
3：焊钢架（门体的骨架，材料：30mm*30mm的矩形钢管）
3: Welded steel frame (frame of door body, material: 30mm * 30MM rectangular steel pipe)
4：用机器热压铅合成板
4: Hot pressing lead composite board with machine
5：制作门体（一面铅合成板，一面密度板材）
5: Making door body (one side of lead composite board, one side of density board)
6：门框料制作（里面做好铅板防护，要求，和扇搭接）
6: Production of door frame material (internal lead plate protection, requirements, overlap with leaf)
7：门扇上面板（1mm冷板静电烤漆面板）
7: Upper panel of door leaf (1mm cold plate electrostatic paint baking panel)
8：组装门扇和门框（合页为加重不锈钢合页）
8: Assemble door leaf and frame (hinge is weighted stainless steel hinge)
9：安装，要求门框和墙部的防护搭接处理，达到开启方便，不露线）
9: For installation, it is required that the door frame and the wall should be protected and lapped to make it easy to open without exposing the line.)
10：门扇下部距离地面间隙不超过5-8mm（处理好下部防护）
10: The gap between the lower part of the door leaf and the ground shall not exceed 5-8mm (handle the lower part protection)
11：锁部位专用防护用锁，内部做好铅防护处理，达到门锁部分不露线
11: The lock part is specially used for protection, and the lead protection treatment shall be done inside to ensure that the part of the lock is not exposed
在看看墙面的铅防护施工：
Take a look at the lead protection construction of the wall:
1、墙面的射线防护施工分铅板，铅合成板施工两种
1. The radiation protection construction of the wall is divided into lead plate and lead composite plate
2、铅板铅合成板施工就是把铅板用热压机把铅板和密度板合成在一起
2. The construction of lead composite board is to combine lead board and density board with hot press
3、把铅合成板固定到墙面上一般采用：搭接防护施工方法
3. The lead composite board fixed to the wall is generally used: lap protection construction method
4、过孔定子开关盒，网线等孔洞做铅板防护处理
4. Through hole stator switch box, network cable and other holes do lead plate protection treatment
5、铅板的外表层一般是石膏板，涂料处理方法和铝塑板饰面方法
5. The outer surface of lead board is generally gypsum board, coating treatment method and aluminum-plastic board finishing method
6、保证了整个房间的防护施工达到搭接节点，保证不会产生露线。
6. The protection construction of the whole room is ensured to reach the lap joint, and no exposed line is guaranteed.
Today's wonderful content is provided by radiation protection equipment. We sincerely provide you with satisfactory service. If you have any questions or questions, please call us or enter our website: http://www.jnlzsb.com
18678809986
