With the rapid development of gas-fired boiler technology, gas-fired boilers are becoming more and more automated and intelligent. With their excellent performance, gas-fired boilers are more and more widely used in hospitals, bathing centers, supermarkets, schools, hotels and so on. They are fully automated to provide users with heating or bathing water and domestic hot water.

但是在使用过程中一些人发现燃气锅炉工作噪声太大，这是什么原因呢？有没有办法这个问题呢？山东燃气锅炉厂家是一家资深的燃气锅炉生产厂家，下面来看看山东燃气锅炉给我们的回答。

But in the process of using, some people find that the working noise of gas-fired boilers is too big. What is the reason? Is there any way to solve this problem? Shandong Gas Boiler Factory is a veteran gas boiler manufacturer. Let's take a look at the answers from Shandong Gas Boiler.

燃气锅炉燃烧器噪声增大，多是因为此油路当中截止阀关闭或者是进油量不足，油过滤器阻塞；再或者，也就是因为此进油温度低，粘度太高或泵进油温度过高；油泵出现故障；风机电机轴承损坏；还有就是因为此风机叶轮太脏导致的设备在噪音上比较大。

The noise of gas-fired boiler burner increases mostly because the cut-off valve is closed or the oil intake is insufficient, and the oil filter is blocked; or because the oil intake temperature is low, the viscosity is too high or the pump oil intake temperature is too high; the oil pump is malfunctioning; the bearing of fan motor is damaged; and because the fan impeller is too dirty, the equipment is noisy.

燃气锅炉使用时出现上述故障，也因为此油质粘度太高不易雾化(重油)；还因为旋风盘与油嘴间距不当；再者也就是因为此大火油嘴磨损或脏污；还因为此预备油箱加热温度过高，致使蒸汽使油泵送油不顺；或者是因为此燃油锅炉里面的的油含水导致的。

The above-mentioned failures occur in gas-fired boilers because the oil viscosity is too high to be atomized (heavy oil); the distance between the cyclone and the nozzle is not appropriate; furthermore, the fuel nozzle is worn or dirty; furthermore, the heating temperature of the reserve tank is too high, which makes the oil pump delivery not smooth; or the water content of the oil in the fuel-fired boilers is the cause.

燃气锅炉使用时一旦出现上述故障，应尽快进行处理，在进行处理的时候，应该要做逐步减小试验；之后也应该要提高加热温度；调整距离(在0~10mm之间)；清洁或更换；设定约50℃左右即可；换油或排水。

Once the above-mentioned faults occur in the use of gas-fired boilers, they should be treated as soon as possible, and the test should be gradually reduced when the treatment is carried out; after that, the heating temperature should be increased; the distance should be adjusted (between 0 and 10 mm); the cleaning or replacement should be carried out; the setting temperature should be about 50 degrees Celsius; the oil or drainage should be changed.

看了山东燃气锅炉给我们的回答，小伙伴们是不是都已经清楚了问题的所在？如果您还有关于燃气锅炉的问题，欢迎咨询我们的客服，我们的官网是：http://www.jnlzsb.com

Looking at the answer given by Shandong Gas Boiler, have all the small partners been clear about the problem? If you have any questions about gas-fired boilers, please consult our customer service. Our official website is http://www.jnlzsb.com.