欢迎光临!济南联众供热设备厂,主营:山东燃气锅炉山东电采暖锅炉山东多介质过滤器和射线防护器材等。
  • 服务热线:18678809986
  • 首页 关于我们 产品中心 新闻中心 工程案例 设备选型 联系我们
  • 您的位置:首页> 新闻中心

    燃气锅炉点不着火的原因诊断?
    来源:http://www.jnlzsb.com 发布时间:2019-05-31

    燃气锅炉不只愈加清洁,燃料应用率和效能也比其他燃料类型的锅炉高出很多,普遍掩盖在我国各行各业的工业加工消费上,在化工消费、食品加工、纺织、造纸等多个行业均有运用。很多运用燃气锅炉的用户向我们反映,在刚启动锅炉时,会呈现点不着火的状况。燃气锅炉遇到这种状况主要是熄灭器零部件和气压的问题,依据不同状况,可做如下剖析。
    Gas-fired boilers are not only cleaner and more environmentally friendly, but also have higher fuel utilization rate and efficiency than other types of boilers. They are generally concealed in the industrial processing consumption of all walks of life in our country, and are used in many industries, such as chemical consumption, food processing, textile, paper making and so on. Many users who use gas-fired boilers tell us that when the boiler is just started, it will not ignite at all. Gas-fired boilers encounter this situation mainly because of the problems of extinguisher components and air pressure. According to different conditions, the following analysis can be made.
    一、启动后前吹扫正常,但点不着火
    1. Cleaning is normal before and after start-up, but it does not ignite.
    1、电火气量缺乏:检查线路并修复
    1. Lack of Electric-Fire Gas: Check Circuits and Repair
    2、电磁阀烧坏、不工作(主阀、点火阀):换新
    2. Solenoid Valve Burn out, Not Working (Main Valve, Ignition Valve): Renovation
    3、气压不稳定:调整气压规则值
    3. Air pressure instability: adjust air pressure to regular value
    4、风量太大:减小配风,减小风门开度
    4. The air volume is too large: reduce the air distribution and the opening of the throttle
    二、锅炉气压正常,点不着火
    2. The pressure of the boiler is normal and it will not ignite.
    1、点火变压器烧坏:换新
    1. Burning out of ignition transformer: renewal
    燃气锅炉
    2、高压线损坏或零落:重新装置或换
    2. High Voltage Wire Damage or Fragmentation: Re-installation or Replacement
    3、点火棒位置相对尺寸间隙过大或过小:重新调整
    3. Ignition rod position relative size gap is too large or too small: readjustment
    4、电极决裂或与地短路:重新装置或换新
    4. Electrode Cracking or Ground Short Circuiting: Re-installation or Renovation
    5、间距不适宜:重新调整
    5. Inappropriate spacing: readjustment
    三、锅炉点着后5~6秒后熄火
    3. Flameout after 5-6 seconds of boiler ignition
    1、气压缺乏,压降太大,供气流量偏小:重新调整气压,清算滤网
    1. Lack of air pressure, too large pressure drop and too small supply air flow: readjusting air pressure and clearing filter screen
    2、风量太小,熄灭不充沛,烟色较浓 :重新调整
    2. The air volume is too small, the extinguishment is not sufficient, and the smoke is strong: readjustment
    3、风量太大,呈现白气:重新调整
    3. Too much air, showing white air: readjustment
    本文的精彩内容由山东燃气锅炉厂家提供相关知识,本网站还有很多的精彩内容,更多的内容您可以点击进入:http://www.jnlzsb.com!我们有专门的客服为您解答问题。
    The wonderful content of this article is provided by Shandong Gas Boiler Manufacturer. There are many wonderful contents on this website. You can click on more content to enter: http://www.jnlzsb.com! We have a special customer service to answer your questions.

    鲁公网安备 37011302000227号