山东燃气锅炉内壁漏水的解决方法
    2017-8-5 16:40:35  文章来源:http://www.jnlzsb.com

    1山东燃气锅炉烟道漏水:先检查是不是锅炉爆管或是管板裂纹所致,如果需要换管、挖补看烟道所用的材质,铝和不锈钢材料可以用铝丝或碳钢氩焊,铁材料可直接酸性焊条。

    1, boiler flue gas Water Leakage: check the pipe or tube is caused by explosion of boiler plate crack is not, if you need to change, look for the flue pipe patching material, aluminum and stainless steel materials with aluminum wire or Steel TIG welding, iron material can be directly acid electrode.

    2、停炉后,将炉水放尽,清除炉内的水垢,水渣和受热面的烟灰。

    2, after the shutdown, the water drain, remove scale furnace slag and ash, water heating surface.

    3、选用适量干燥剂。常用干燥剂有无水氯化钙和生石灰,无水氯化钙按每立方米水容积2kg定量放置,要求选用15mm左右的颗粒;生石灰按每立方米水容积3kg定量放置,要求选用10mm~30mm的块状物。

    3, select appropriate amount of desiccant. The commonly used desiccant with anhydrous calcium chloride and lime, anhydrous calcium chloride per cubic meter of water volume 2kg quantitative selection requirements placed around 15mm particles; quicklime placed per cubic meter of water volume 3kg quantitative, block selection requirements 10mm~30mm.

    4、关闭锅炉的供水管、给水管、排污管上的阀门,或用隔板堵严,与其它运行锅炉完全隔绝。

    山东电采暖锅炉多少钱

    4. Close the boiler water supply pipe, water supply pipe, sewage pipe valve, or block the diaphragm, and completely separate from other operating boilers.

    5、燃气锅炉内壁漏水:内壁漏水也分为锅筒漏水和水冷辟及下降管漏水,如果是前者漏眼比较小,可以进行钢号相同挖补,挖补后再进行探伤。后前漏水就需要换管,面积较大的更换一根。

    5, the gas boiler inside wall is also divided into Water Leakage: Water Leakage drum Water Leakage and water down pipe Water Leakage provision and, if the former leakage hole is relatively small, can be the same grade of steel after the inspection of scarf, scarf. After the leakage, you need to replace the tube, the larger the replacement of a root.

    6、打开人孔、手孔,使锅炉自然干燥,若锅炉潮湿,用微火将锅炉本体及炉墙、烟道烘干。

    6, open the manhole, hand hole, the boiler natural drying, if the boiler with fire will be wet, boiler and furnace wall, drying flue.

    7、锅炉干燥后,将装有干燥剂的托盘放人炉膛和锅筒中,以吸收潮气,要求干燥剂不能与锅炉受热面直接接触。

    7. After the boiler is dry, put the tray with the desiccant in the furnace and the boiler barrel to absorb moisture, and ask that the drier can not contact with the heating surface of the boiler directly.

    8、阀门漏水:阀门类漏水应该加盘根或更换新的阀门。

    8, valve leakage: valve leakage should be added packing or replace the new valve.

    以上便是山东燃气锅炉http://www.jnlzsb.com/今天的分享,您还满意吗,欢迎关注我们的网站并且关注我们的产品,我们将为您提供优良的产品,衷心的愿与您建立合作关系。

    The above is the Shandong http://www.jnlzsb.com/ gas boiler to share today, you still satisfied with it, welcome to our website and pay attention to our products, we will provide you with excellent products, sincerely wish to establish business relationship with you.