燃气锅炉的燃料油要进行定期脱水
    2017-11-17 18:08:51  文章来源:http://www.jnlzsb.com

    随着节能环保理念的大力提倡,就锅炉行业来说,燃油燃气锅炉逐步取代燃煤型锅炉。

    With the vigorous promotion of energy saving and environmental protection concept, in the boiler industry, oil and gas boilers gradually replace coal-fired boilers.

    但在使用燃油燃气锅炉的过程中,或多或少的出现一些问题,在冬季,熄火现象是比较常见的。山东燃气锅炉为了预防这种情况的发生,就需要做好以下事项。

    But in the use of oil and gas boiler process, more or less some problems, in winter, flameout phenomenon is more common. Shandong gas boiler in order to prevent the occurrence of this situation, we need to do the following.

    ①燃油燃气锅炉的燃料油要定期脱水,脱水回收的燃料油应净化后送人油缸。要明确规定油缸油位和油温的上下极限,以保证正常供油。应定期清扫缸底沉渣,以防止堵塞油管。

    The fuel oil of the oil and gas boiler should be dehydrated periodically, and the recovered fuel oil should be purified to the evacuation cylinder. To specify the upper and lower limits of the oil level and the oil temperature of the cylinder, in order to ensure the normal oil supply. The sediment of cylinder bottom should be cleaned regularly to prevent tubing blockage.

    ②加强燃油燃气锅炉燃料油的管理工作,认真掌握来油的品种。当油品不同时,应做混对试验。如果产生沉淀时,应分缸储存,以防混存结块堵塞。

    Strengthen the management of fuel oil for fuel gas boiler, and master the varieties of oil. When the oil is not the same, the mixing test should be done. If precipitation occurs, store it in separate cylinders to prevent clogging.

    ③加热器要定期检查,如发现泄漏应及时修理。④定期清理过滤器。

    山东燃气锅炉

    Heater should be checked regularly. If leakage is found, it should be repaired in time. Clean filter regularly.

    ⑤利用蒸汽、空气雾化的油喷嘴,在进行调压工作时要严防油压过多地低于蒸汽、空气的压力,以免引起燃油无法进入喷油嘴。

    The use of steam, air atomizing oil nozzle, in the pressure adjustment work, to prevent the oil pressure is too much lower than the steam, air pressure, so as not to cause fuel can not enter the nozzle.

    ⑥有的燃油燃气锅炉的供油系统只是在油泵出入口装有回流管,通称短回流管。当油中带水造成炉膛熄火时,这部分带水的油就无法排除。因此,常在炉前装设一根与油缸连接的回流管,通称长回流管。当油中带水时可立即换缸,将这部分带水的油经过长回流管,进一步脱水。

    Some of the fuel gas boiler fuel supply system with a return pipe just at the pump entrance, known as short return pipe. When the oil in the water with the furnace flameout, this part of the oil with water can not be ruled out. Therefore, a backflow pipe connected with the oil cylinder is usually installed in front of the furnace, which is generally called a long return pipe. When the oil is filled with water, the cylinder can be changed immediately, and the part of the oil with water is further dehydrated through the long return pipe.

    本文由山东燃气锅炉友情奉献.更多有关的知识请点击:http://www.jnlzsb.com我们将用最先进的技术.最真诚的态度.为您提供最为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

    In this paper, Shandong gas boiler friendship dedication. More relevant knowledge please click: http://www.jnlzsb.com, we will use the most advanced technology, the most sincere attitude to provide you with the most comprehensive services. More knowledge, we will continue to dedicate to you. Please look forward to