怎么检测你的数控锅炉是合格的节能环保锅炉呢?
    2018-10-27 14:59:30  文章来源:http://www.jnlzsb.com
    1、查看燃煤采暖炉烟筒是否冒烟。用眼睛能看到的烟,尤其黑烟,都是燃料,都来自煤中。如果烟筒冒烟,这样的锅炉肯定不会省煤,并且热效率不高。主要的是这样的锅炉还不环保。有的锅炉只有加装了除尘器,烟筒才不冒烟。这样的锅炉虽然排放环保了,但不省煤。因为黑烟不是作为燃料烧掉了,而是被除尘器处理了。
    1, check whether the chimney of coal-fired heating stove smokes. The smoke that can be seen with eyes, especially black smoke, is all fuel and comes from coal. If the chimney smokes, such a boiler will certainly not economizer and its thermal efficiency is not high. The main reason is that such boilers are not environmentally friendly. Some boilers only install dust remover and smoke pipes do not smoke. Such a boiler is environmentally friendly, but it does not save coal. Because black smoke was not burned as fuel, but treated by dust remover.
    2、查看燃煤采暖炉炉底的煤渣是否多。如果煤渣多而且多为块状,说明煤的燃烧不充分,煤的热值没有充分利用,这样的锅炉肯定不会省煤,并且热效率不高。
    2, check whether there are more coal cinder in the bottom of coal-fired heating furnace. If the slag is more and more lumpy, indicating that the combustion of coal is not sufficient, the calorific value of coal is not fully utilized, such a boiler will certainly not save coal, and thermal efficiency is not high.数控采暖锅炉
    3、用手迅速触摸一下燃煤采暖炉烟筒外壁,感知烟筒的排烟温度是否高。如果手烫得受不了,这时的排烟温度应该在200℃以上,说明锅炉浪费掉的热量很多,而这些热量都来自锅炉烧的煤,所以这样的锅炉肯定不会省煤,并且热效率不高。
    3. Quickly touch the outer wall of the chimney of the coal-fired heating furnace by hand and perceive whether the exhaust temperature of the chimney is high. If the hand is too hot to bear, then the flue gas temperature should be above 200 degrees Celsius, indicating that the boiler wastes a lot of heat, and these heat from the boiler burning coal, so such a boiler will certainly not save coal, and thermal efficiency is not high.
    4、用手摸锅炉的外表面,感知是否发热。如果发热,说明锅炉自身保温效果不好,白白散发掉的热量较多,而这些热量都来自锅炉烧的煤,所以这样的锅炉肯定不会省煤,并且热效率不高。
    4, touch the outer surface of the boiler to see if it is hot. If the heating, indicating that the boiler's own insulation effect is not good, white emit more heat, and these heat are from the boiler burning coal, so such a boiler will certainly not save coal, and thermal efficiency is not high.
    5、把手伸到填燃煤采暖炉煤口附近,感知一下填煤口附近的温度。如果比较热,说明从填煤口白白散发掉的热量较多,而这些热量都来自锅炉烧的煤,所以这样的锅炉肯定不会省煤,并且热效率不高。
    5. Put your hands around the coal filled heating furnace, and feel the temperature near the coal filling mouth. If it is hot, it shows that more heat is emitted from the coal filling mouth, and these heat comes from the coal burned by the boiler, so such a boiler will certainly not save coal, and the thermal efficiency is not high.
    以上是如何检测您的数控采暖锅炉是否合格,更多内容点击:http://www.jnlzsb.com,希望可以更多的帮到您。
    The above is how to test your CNC heating boiler is qualified, more content click: http://www.jnlzsb.com, I hope you can help more.
      报错