欢迎光临!济南联众供热设备厂,主营:山东燃气锅炉山东电采暖锅炉山东多介质过滤器和射线防护器材等。
  • 服务热线:18678809986
  • 首页 关于我们 产品中心 新闻中心 工程案例 设备选型 联系我们
  • 您的位置:首页> 新闻中心

    燃汽锅炉节约燃气资源的技巧
    来源:http://www.jnlzsb.com 发布时间:2019-04-09

    燃气锅炉在运作的时候,可以通过一些小技巧来达到减排的效果。我们该如何做呢?下面我们听听山东燃气锅炉的意见吧。
    Gas-fired boilers can achieve the effect of energy saving and emission reduction through some small techniques when they are in operation. What should we do? Now let's listen to Shandong Gas Boiler's opinion.
    在燃气锅炉的实践工作运转过程中,供热情况会不断发生改变,遇到气候的改变,锅炉供热地带的热量总需求就会跟着发生改变。在之中,白天和晚上的热量需求情况也是有差异的,这就需求燃气锅炉在要时刻依据总热量需求的改变,对燃气和空气的运送量进行科学合理的调理,以确保锅炉的运转效率,既能确保必要的热量需求供给,又不糟蹋燃气资源。现阶段使用带电子比例调理的低氮燃烧器比较多,关于这种燃烧器主要是通过单回路PID对出水温度进行调理操控,在此基础上,依据出水温度的设定值与实践出水温度检测值的差值,对调理燃料阀进行调整,使其逐渐到达合理的状态。在这个过程中,假如为了让燃烧作用到达好,还能够直接提高烟气含氧量,然后确保空气中的氧气足够。
    During the practical operation of gas-fired boilers, the heating situation will change constantly. When the climate changes, the total heat demand in the heating zone of the boilers will change accordingly. In a day, the heat demand of day and night is also different, which requires gas-fired boilers to adjust the quantity of gas and air transported scientifically and reasonably according to the change of total heat demand at all times, so as to ensure the operation efficiency of the boilers, not only to ensure the necessary heat demand supply, but also not to spoil the gas resources. At present, there are many low nitrogen burners with electronic proportional adjustment. On this basis, according to the difference between the set value of the outlet temperature and the measured value of the actual outlet temperature, the adjusting fuel valve is adjusted to make it reach a reasonable state gradually. In this process, in order to achieve the best combustion effect, it can also directly increase the oxygen content of flue gas, and then ensure that the oxygen in the air is sufficient.
    一般来说,燃烧操控算法都具有一定的人工辅导功用,具体来说,能够通过人工自主设定的方法,对锅炉的运转时刻进行设定,从锅炉焚烧,到其满负荷运转,不同类型的锅炉,所需求的时刻也不相同。锅炉在有负荷运转时,内部的燃烧操控软件会依据实践温度的改变,对锅炉的符合进行相应的调整。假如是温差较大,通常锅炉会使用全开式燃烧,智能软件的动态调整,能够让满负荷的锅炉平稳运转,以减少燃料的糟蹋。
    Generally speaking, the combustion control algorithm has a certain function of manual guidance. Specifically, the operation time of the boiler can be set by the method of manual self-determination. From the burning of the boiler to its full load operation, different types of boilers require different times. When the boiler operates under load, the internal combustion control software will adjust the boiler's conformity according to the change of the practical temperature. If the temperature difference is large, usually the boiler will use full-open combustion, dynamic adjustment of intelligent software, can make the full-load boiler run smoothly, to reduce the waste of fuel.
    以上精彩内容由山东燃气锅炉友情提供,更多精彩内容欢迎收藏我们的官网:http://www.jnlzsb.com
    The above wonderful content is provided by Shandong Gas Boiler Friendship. More wonderful content is welcome to collect our official website: http://www.jnlzsb.com.

    鲁公网安备 37011302000227号